The ADN2819 provides receiver functions of Quantization, Signal Level Detect and Clock and Data Recovery at rates of OC-3, OC-12, Gigabit Ethernet, OC-48 and all FEC rates. All SONET jitter requirements are met, including: Jitter Transfer; Jitter Generation; and Jitter Tolerance. All specifications are quoted for -40ºC to +85ºC ambient temperature unless otherwise noted.

The proprietary delay and phase-locked loop design of the ADN2819 provides unprecedented jitter performance for robust high-speed networking designs.

The device is intended for WDM system applications and can be used with either an external reference clock or an on-chip crystal oscillator. Both native rates and 15/14 rate digital wrappers rates are supported by the ADN2819, without any change of reference clock required. This device together with a PIN diode and a TIA preamplifier can implement a highly integrated, low cost, low power fiber optic receiver. The receiver front end Signal Detect circuit indicates when the input signal level has fallen below a user adjustable threshold.

Part#	Voltage Supply (V)	Data Rate (Gb/s)	Power Dissipation (mW)	Input Sensitivity (mVp-p)	Jitter Tolerance (Ulpp)	Jitter Transfer	Jitter Gen (mUI rms)	Rate	Package	Price* (1000-4999)
AD800	-5.5	156	-	80	.9 UI @ 65 kHz	-	-	-	20-Lead SOIC	$18.90
AD807	+5	0.155	170	2	1.0 @ 65 kHz	92 kHz	5	Single	16-Lead SOIC	$11.18
AD808	+5	0.622	400	4	0.6 @ 250 kHz	333 kHz	7	Single	16-Lead SOIC	$11.48
ADN2804	+3.3	0.622	420	3	1.0 @ 250 kHz	71 kHz @ OC12	1	Single	5x5 mm LFCSP	$10.00
ADN2806	+3.3	0.622	360	200	1.0 @ 250 kHz	71 kHz @ OC12	1	Single	5x5 mm LFCSP	$9.24
ADN2807	+3.3	0.622	500	4	1.0 @ 250 kHz	140 kHz @ OC12	1	Multi	7x7 mm LFCSP	$11.64
ADN2811	+3.3	2.7	500	4	1.0 @ 1 MHz	590 kHz @ OC48	2	Single	7x7 mm LFCSP	$37.44
ADN2812	+3.3	2.7	750	6	1.0 @ 1 MHz	490 kHz @ OC48	1	Continous	5x5 mm LFCSP	$54.65
ADN2813	+3.3	1.25	375	6	1UI @ 637 kHz	71 kHz @ OC12	1	Continous	5x5 mm LFCSP	$19.73
ADN2814	+3.3	0.675	350	6	1.0 @ 250 kHz	71 kHz @ OC12	1	Continous	5x5 mm LFCSP	$11.64
ADN2815	+3.3	1.25	300	6	1.0 @ 250 kHz	71 kHz @ OC12	1	Continous	5x5 mm LFCSP	$17.76
ADN2816	+3.3	0.675	300	4	1.0 @ 250 kHz	71 kHz @ OC12	1	Continous	5x5 mm LFCSP	$10.47
ADN2817	+3.3	2.7	650	5	1.0 @ 1 MHz	500 kHz @ OC48	1	Continous	5x5 mm LFCSP	$44.26
ADN2818	+3.3	2.7	600	200	1.0 @ 1 MHz	500 kHz @ OC48	1	Continous	5x5 mm LFCSP	$42.05
ADN2819	+3.3	2.7	500	4	1.0 @ 1 MHz	590 kHz @ OC48	2	Multi	7x7 mm LFCSP	$45.54
ADN2865	+3.3	2.7	1200	6	-	-	-	Continous	-	-

* The pricing listed here is provided only for budgetary purposes as recommended list price in U.S. Dollars in the United States ex factor per unit for the stated volume. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.
** Pricing is currently unavailable. Click on the product number to see the Product Page for additional information.

The model number is a specific version of a generic that can be purchased or sampled.

Status indicates the current lifecycle of the product. This can be one of 4 stages:

• Pre-Release: The model has not been released to general production, but samples may be available.
• Production: The model is currently being produced, and generally available for purchase and sampling.
• Last Time Buy: The model has been scheduled for obsolescence, but may still be purchased for a limited time.
• Obsolete: The specific part is obsolete and no longer available. Other models listed in the table may still be available (if they have a status that is not obsolete).

The package for this IC (i.e. DIP, SOIC, BGA). An Evaluation Board is a board engineered to show the performance of the model, the part is included on the board.

For detailed drawings and chemical composition please consult our  Package Site

Pin Count is the number of pins, balls, or pads on the device. Pin-out diagrams & pin function descriptions may be found in the datasheet.

This is the acceptable operating range of the device. The various ranges specified are as follows:

• Commercial: 0 to +70 degrees Celsius
• Military : -55 to +125 degrees Celsius
• Industrial: Temperature ranges may vary by model. Please consult the datasheet for more information.
• Automotive: -40 to +125 degrees Celsius

The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.

This is the date Analog Devices, Inc. anticipates that the product will ship from the warehouse. Most orders ship within 48 hours of this date.Once an order has been placed, Analog Devices, Inc. will send an Order Acknowledgement email to confirm your delivery date. It is important to note the scheduled dock date on the order entry screen. We do take orders for items that are not in stock, so delivery may be scheduled at a future date. Also, please note the warehouse location for the product ordered. We have warehouses in the United States, Europe and Southeast Asia. Transit times from these sites may vary.

Due to environmental concerns, ADI offers many of our products in lead-free versions. For more information about lead-free parts, please consult our Pb (Lead) free information page.