The AD626 is a low cost, true single supply differential amplifier designed for amplifying and low-pass filtering small differential voltages from sources having a large common-mode voltage.

The AD626 can operate from either a single supply of +2.4 V to +10 V, or dual supplies of ±1.2 V to ±6 V. The input common-mode range of this amplifier is equal to 6 (+V_S - 1 V) which provides a +24 V CMR while operating from a +5 V supply. Furthermore, the AD626 features a CMR of 90 dB typ.

The amplifier's inputs are protected against continuous overload of up to 50 V, and RFI filters are included in the attenuator network. The output range is +0.03 V to +4.9 V using a +5 V supply. The amplifier provides a preset gain of 10, but gains between 10 to 100 can be easily configured with an external resistor. Furthermore, a gain of 100 is available by connecting the G = 100 pin to analog ground. The AD626 also offers low-pass filter capability by connecting a capacitor between the filter pin and analog ground.

The AD626A and AD626B operate over the industrial temperature range of -40°C to +85°C. The AD626 is available in two 8-pin packages: a plastic mini-DIP and SOIC.

Part#	Common Mode Range (V)	Bandwidth G=10 (kHz typ)	CMRR (dB)	Gain Range (min to max)	Voltage Supply (Vmin)	Voltage Supply (Vmax)	Supply Current (max)	VosiTC (µV/deg C)	Gain temp co.	Temperature Range	Package	Price* (1000-4999)
AD22057	-1 to 24	30	80	20	+3	+26	0.5mA	-	-	-40 to +125	DIP, SOIC	$4.62
AD626	0 to 54	100	66	90	±2.4	±6	2mA	0.000006	150ppm/C	-40 to +85	DIP, SOIC	$3.70
AD628	+/- 100	600	77	100	±5	±18	1.6mA	-	-	-40 to +85	SOIC	$1.78
AD629	+/- 270	500	77	1	±2.5	±18	1mA	-	-	-40 to +85	DIP, SOIC	$2.84
AD8202	-12 to 30	50	82	20	+3.5	+12	0.25mA	10	20ppm/C	-40 to +125	Die, SOIC, SOP	$1.51
AD8203	-12 to 30	60	82	14	+3.5	+12	0.25mA	10	20ppm/C	-40 to +125	SOP	$1.37
AD8205	-2 to 65	50	78	50	+4.5	+5	2mA	15	30ppm/C	-40 to +125	Die, SOIC	$1.51
AD8206	-2 to 65	100	76	20	+4.5	+5.5	2mA	15	30ppm/C	-40 to +125	Die, SOIC	$1.37
AD8210	-2 to 65	500	100	20	+4.5	+5.5	1.5mA	10	20ppm/C	-40 to +125	SOIC	$1.81
AD8211	-2 to 65	500	120	20	-	-	2mA	12	20ppm/C	-40 to +125	SOT	$0.81
AD8212	7 to 65	1000	100	1,000	+7	+65	720µA	10	-	-40 to +125	MSOP	$0.93
AD8213	-2 to 65	500	100	20	+4.5	+5.5	2.5mA	12	10ppm/C	-40 to +125	MSOP	$2.01
AD8214	5 to 65	-	80	100	+5	+65	1.2mA	15	-	-40 to +125	MSOP	$0.76
AD8215	-2 to 65	450	100	20	-	-	2.2mA	6	15ppm/C	-40 to +125	SOIC	$1.21
AD8216	-4 to 65	3000	90	3	-	-	2mA	10	10ppm/C	-40 to +125	SOIC	$1.62
AD8228	-	650	100	10,100	-	-	-	-	-	-40 to +85	-	$3.03
AD8270	-Vs to +Vs	10000	98	1.5	-	-	2.5mA	1.5	1ppm/C	-40 to +125	-	$1.89
AD8273	+/- 40	20000	86	1.5	-	-	2.5mA	3	2ppm/C	-40 to +125	-	$1.67
AD8290	-	-	120	50	-	-	4.68mA	-	15ppm/C	-	-	$1.52
AD8553	-	1	100	10,000	+1.8	+5.5	1.3mA	-	-	-40 to +85	MSOP	$1.32
ADM4073	2 to 28	1800	90	40	+3	+28	-	-	-	-40 to +125	SOT	$0.99
AMP03	+/- 20	3000	85	1	±5	±15	2.5mA	-	-	-40 to +85	-	$2.81

* The pricing listed here is provided only for budgetary purposes as recommended list price in U.S. Dollars in the United States ex factor per unit for the stated volume. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.
** Pricing is currently unavailable. Click on the product number to see the Product Page for additional information.

The model number is a specific version of a generic that can be purchased or sampled.

Status indicates the current lifecycle of the product. This can be one of 4 stages:

• Pre-Release: The model has not been released to general production, but samples may be available.
• Production: The model is currently being produced, and generally available for purchase and sampling.
• Last Time Buy: The model has been scheduled for obsolescence, but may still be purchased for a limited time.
• Obsolete: The specific part is obsolete and no longer available. Other models listed in the table may still be available (if they have a status that is not obsolete).

The package for this IC (i.e. DIP, SOIC, BGA). An Evaluation Board is a board engineered to show the performance of the model, the part is included on the board.

For detailed drawings and chemical composition please consult our  Package Site

Pin Count is the number of pins, balls, or pads on the device. Pin-out diagrams & pin function descriptions may be found in the datasheet.

This is the acceptable operating range of the device. The various ranges specified are as follows:

• Commercial: 0 to +70 degrees Celsius
• Military : -55 to +125 degrees Celsius
• Industrial: Temperature ranges may vary by model. Please consult the datasheet for more information.
• Automotive: -40 to +125 degrees Celsius

The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.

This is the date Analog Devices, Inc. anticipates that the product will ship from the warehouse. Most orders ship within 48 hours of this date.Once an order has been placed, Analog Devices, Inc. will send an Order Acknowledgement email to confirm your delivery date. It is important to note the scheduled dock date on the order entry screen. We do take orders for items that are not in stock, so delivery may be scheduled at a future date. Also, please note the warehouse location for the product ordered. We have warehouses in the United States, Europe and Southeast Asia. Transit times from these sites may vary.

Due to environmental concerns, ADI offers many of our products in lead-free versions. For more information about lead-free parts, please consult our Pb (Lead) free information page.