• Visit our detailed system design support and FAQ page.
• View our Touch Control Demo.

The AD7147 CapTouch™ controller is designed for use with capacitance sensors implementing functions such as buttons, scroll bars, and wheels. The sensors need only one PCB layer, enabling ultrathin applications.

The AD7147 is an integrated CDC with on-chip environmental calibration. The CDC has 13 inputs channeled through a switch matrix to a 16-bit, 250 kHz sigma-delta (Σ-Δ) converter. The CDC is capable of sensing changes in the capacitance of the external sensors and uses this information to register a sensor activation. By programming the registers, the user has full control over the CDC setup.

High resolution sensors require minor software to run on the host processor.

The AD7147 is designed for single electrode capacitance sensors (grounded sensors). There is an active shield output to minimize noise pickup in the sensor.

The AD7147 has on-chip calibration logic to compensate for changes in the ambient environment. The calibration sequence is performed automatically and at continuous intervals as long as the sensors are not touched. This ensures that there are no false or nonregistering touches on the external sensors due to a changing environment.

The AD7147 has an SPI-compatible serial interface, and the AD7147-1 has an I²C®-compatible serial interface. Both parts have an interrupt output, as well as a GPIO. There is a V_DRIVE pin to set the voltage level for the serial interface independent of V_CC.

The AD7147 is available in a 24-lead, 4 mm × 4 mm LFCSP and operates from a 2.6 V to 3.6 V supply. The operating current con-sumption in low power mode is typically 26 μA for 13 sensors.

Applications

• Cell phones
• Personal music and multimedia players
• Smart handheld devices
• Television, A/V, and remote controls
• Gaming consoles
• Digital still cameras

Part#	Resolution (Bits)	T-Put Rate	# Chan	Supply V	Pwr Diss (max)	Input Base C (pF Max)	Cin Range (pF)	Pkg Type	Price* (1000-4999)	Product Description	Interface
AD7142	16	27.8SPS	14	Single(+2.6 to +3.6), Single(+2.7), Single(+3), Single(+3.3)	3.6mW	20	±2	CSP	$1.37	CAPTouch (TM) Programmable Controller for 2-Electrode Capacitance Sensor with SPI or I2C Interface	I²C/Ser 2-Wire, Ser, SPI
AD7143	16	43.5SPS	8	Single(+2.6 to +3.6)	3.6mW	20	±2	CSP	$1.25	CAPTouch (TM) Programmable Controller for 2-Electrode Capacitance Sensor with I2C Interface	I²C/Ser 2-Wire, Ser
AD7147	16	111SPS	13	Single(+3), Single(+3.3)	3.6mW	20	±8	CSP	$1.30	CAPTouch (TM) Programmable Controller w/ SPI or I2C Interface for Single-Electrode Cap Sensors	I²C/Ser 2-Wire, Ser, SPI
AD7150	12	100SPS	2	Single(+2.7 to +3.6)	0.43mW	10	±4	SOP	$1.37	Ultra-Lo Pwr, 2-Ch Capacitance Converter for Proximity Sensing Applications	I²C/Ser 2-Wire, Ser
AD7151	12	100SPS	1	Single(+2.7 to +3.6)	0.3mW	10	±4	SOP	$1.37	Ultra-Low Power, 1-Ch, Capacitance Converter for Proximity Sensing Applications	I²C/Ser 2-Wire, Ser
AD7745	24	90SPS	1	Single(+2.7 to +5.25)	4.25mW	17	±4	SOP	$4.66	24-Bit, Cap-to-Dig Conv. w/ 1 SE/Diff Capacitive Input Ch for Interface to Dual Electrode Cap Sensor	I²C/Ser 2-Wire, Ser
AD7746	24	90SPS	2	Single(+2.7 to +5.25)	4.25mW	17	±4	SOP	$5.01	24-bit, Cap-to-Dig Conv. w/ 2 SE/Diff Capacitive Input Ch for interface to Dual Electrode Cap Sensor	I²C/Ser 2-Wire
AD7747	24	45.5SPS	1	Single(+2.7 to +5.25)	4.25mW	17	±8	SOP	$4.66	24-bit, Cap-to-Dig Conv w/1 SE/Diff Capacitive Input Ch for interface to Single Electrode Cap Sensor	I²C/Ser 2-Wire, Ser

* The pricing listed here is provided only for budgetary purposes as recommended list price in U.S. Dollars in the United States ex factor per unit for the stated volume. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.
** Pricing is currently unavailable. Click on the product number to see the Product Page for additional information.

The model number is a specific version of a generic that can be purchased or sampled.

Status indicates the current lifecycle of the product. This can be one of 4 stages:

• Pre-Release: The model has not been released to general production, but samples may be available.
• Production: The model is currently being produced, and generally available for purchase and sampling.
• Last Time Buy: The model has been scheduled for obsolescence, but may still be purchased for a limited time.
• Obsolete: The specific part is obsolete and no longer available. Other models listed in the table may still be available (if they have a status that is not obsolete).

The package for this IC (i.e. DIP, SOIC, BGA). An Evaluation Board is a board engineered to show the performance of the model, the part is included on the board.

For detailed drawings and chemical composition please consult our  Package Site

Pin Count is the number of pins, balls, or pads on the device. Pin-out diagrams & pin function descriptions may be found in the datasheet.

This is the acceptable operating range of the device. The various ranges specified are as follows:

• Commercial: 0 to +70 degrees Celsius
• Military : -55 to +125 degrees Celsius
• Industrial: Temperature ranges may vary by model. Please consult the datasheet for more information.
• Automotive: -40 to +125 degrees Celsius

The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.

This is the date Analog Devices, Inc. anticipates that the product will ship from the warehouse. Most orders ship within 48 hours of this date.Once an order has been placed, Analog Devices, Inc. will send an Order Acknowledgement email to confirm your delivery date. It is important to note the scheduled dock date on the order entry screen. We do take orders for items that are not in stock, so delivery may be scheduled at a future date. Also, please note the warehouse location for the product ordered. We have warehouses in the United States, Europe and Southeast Asia. Transit times from these sites may vary.

Due to environmental concerns, ADI offers many of our products in lead-free versions. For more information about lead-free parts, please consult our Pb (Lead) free information page.