An Overview of the iSensor™ family of products is available.

The ADIS16120 is a low noise, angular rate sensor (gyroscope) that includes all of the necessary embedded signal conditioning to provide a low noise, analog output over the complete dynamic range of ±300°/sec. Factory calibration provides excellent offset and gain accuracy. The unique design implementation provides superior stability over variations in temperature, voltage, linear acceleration, vibration, and next-level assembly. The surface-micromachining manufacturing technology is the same high volume BiMOS process used by Analog Devices, Inc. for its high reliability automotive sensor products.

The output signal, RATEOUT, is a voltage proportional to the angular rate about the axis normal to the top surface of the package. A precision reference and a temperature output are provided for system-level calibrations and a digital self-test feature is provided to enable system-level diagnostics. The self-test function electromechanically excites the sensor to verify proper operation.

The 35.6 mm × 42.4 mm (plus mounting extensions) package provides the convenience of a standard geometry 24-pin interface and four mounting holes for simple installation.

Applications

Guidance and control

Instrumentation

Inertial measurement units (IMU)

Stabilization

Part#	Product Description	Range	Sensitivity	Typical Bandwidth (kHz)	Noise Density (°/s/rtHz)	Voltage Supply (V)	Supply Current (max)	Temp Range (°C)	Package	Price* (1000-4999)
ADIS16060	Wide Bandwidth Digital Output Gyro	+/- 80 °/s	0.0122 °/s/LSB	1	0.04	4.75 to 5.25	6.5mA	-40 to 105°C	8mm x 8mm LGA	$35.37
ADIS16080	Digital Output Gyro	+/- 80 °/s	0.098 °/s/LSB	0.04	0.05	4.75 to 5.25	7mA	-40 to 85	8mm x 8mm LGA	$35.37
ADIS16100	Digital Output Gyro	+/-300 °/s	0.244 °/s/LSB	0.04	0.1	4.75 to 5.25	7mA	-40 to 85	8mm x 8mm LGA	$35.37
ADIS16120	Low Noise Gyro	+/ - 300 °/s	0.2 °/s/mV	0.32	0.015	4.75 to 5.25	95mA	-40 to 85	36 mm x 42 mm Mod	$636.55
ADIS16130	Digital Output High Precision Gyro	+/- 250 °/s	0.000042 °/s/LSB	0.3	0.0125	4.75 to 5.25	73mA	-40 to 85°C	36 mm x 44 mm Mod	$504.99
ADIS16250	Programable Gyro	+/- 80 to +/- 320 °/s	0.018 °/s/LSB	0.05	0.05	4.75 to 5.25	18mA	-40 to 85	11.1 mm x 11.1mm LGA	$42.48
ADIS16251	Programable Gyro	+/- 20 to +/- 80 °/s	0.004 °/s/LSB	0.05	0.05	4.75 to 5.25	18mA	-40 to 85°C	11.1 mm x 11.1mm LGA	$42.48
ADIS16255	Programable Gyro w/ Temp Compensation	+/- 80 to +/- 320 °/s	0.018 °/s/LSB	0.05	0.05	4.75 to 5.25	18mA	-40 to 85	11.1 mm x 11.1mm LGA	$56.57
ADIS16350	6 DoF Sensor (room temp CAL)	+/- 75 to 300 °/s	0.018 °/s/LSB	0.35	0.05	4.75 to 5.25	33mA	-40 to 85°C	23 mm x 23 mm x 23 mm Mod	$278.30
ADIS16354	6 DoF Sensor (-20 to 70C CAL)	+/- 75 to 300 °/s	0.018 °/s/LSB	0.35	0.05	4.75 to 5.25	33mA	-40 to 85°C	23 mm x 23 mm x 23 mm Mod	$325.86
ADIS16355	6 DoF Sensor (-40 to 85C CAL	+/- 75 to 300 °/s	0.018 °/s/LSB	0.35	0.05	4.75 to 5.25	33mA	-40 to 85°C	23 mm x 23 mm x 23 mm Mod	$363.31

* The pricing listed here is provided only for budgetary purposes as recommended list price in U.S. Dollars in the United States ex factor per unit for the stated volume. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.
** Pricing is currently unavailable. Click on the product number to see the Product Page for additional information.

The model number is a specific version of a generic that can be purchased or sampled.

Status indicates the current lifecycle of the product. This can be one of 4 stages:

• Pre-Release: The model has not been released to general production, but samples may be available.
• Production: The model is currently being produced, and generally available for purchase and sampling.
• Last Time Buy: The model has been scheduled for obsolescence, but may still be purchased for a limited time.
• Obsolete: The specific part is obsolete and no longer available. Other models listed in the table may still be available (if they have a status that is not obsolete).

The package for this IC (i.e. DIP, SOIC, BGA). An Evaluation Board is a board engineered to show the performance of the model, the part is included on the board.

For detailed drawings and chemical composition please consult our  Package Site

Pin Count is the number of pins, balls, or pads on the device. Pin-out diagrams & pin function descriptions may be found in the datasheet.

This is the acceptable operating range of the device. The various ranges specified are as follows:

• Commercial: 0 to +70 degrees Celsius
• Military : -55 to +125 degrees Celsius
• Industrial: Temperature ranges may vary by model. Please consult the datasheet for more information.
• Automotive: -40 to +125 degrees Celsius

The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.

This is the date Analog Devices, Inc. anticipates that the product will ship from the warehouse. Most orders ship within 48 hours of this date.Once an order has been placed, Analog Devices, Inc. will send an Order Acknowledgement email to confirm your delivery date. It is important to note the scheduled dock date on the order entry screen. We do take orders for items that are not in stock, so delivery may be scheduled at a future date. Also, please note the warehouse location for the product ordered. We have warehouses in the United States, Europe and Southeast Asia. Transit times from these sites may vary.

Due to environmental concerns, ADI offers many of our products in lead-free versions. For more information about lead-free parts, please consult our Pb (Lead) free information page.