AD603:  Low Noise, 90 MHz Variable Gain Amplifier

The AD603 is a low noise, voltage-controlled amplifier for use in RF and IF AGC systems. It provides accurate, pin-selectable gains of −11 dB to +31 dB with a bandwidth of 90 MHz or +9 dB to 51+ dB ...More

AD603:  Low Noise, 90 MHz Variable Gain Amplifier

Product Description

The AD603 is a low noise, voltage-controlled amplifier for use in RF and IF AGC systems. It provides accurate, pin-selectable gains of −11 dB to +31 dB with a bandwidth of 90 MHz or +9 dB to 51+ dB with a bandwidth of 9 MHz. Any intermediate gain range may be arranged using one external resistor. The input referred noise spectral density is only 1.3 nV/√Hz, and power consumption is 125 mW at the recommended ±5 V supplies.

The decibel gain is linear in dB, accurately calibrated, and stable over temperature and supply. The gain is controlled at a high impedance (50 MΩ), low bias (200 nA) differential input; the scaling is 25 mV/dB, requiring a gain control voltage of only 1 V to span the central 40 dB of the gain range. An overrange and underrange of 1 dB is provided whatever the selected range. The gain control response time is less than 1 μs for a 40 dB change.

The differential gain control interface allows the use of either differential or single-ended positive or negative control voltages. Several of these amplifiers may be cascaded and their gain control gains offset to optimize the system SNR.

The AD603 can drive a load impedance as low as 100 Ω with low distortion. For a 500 Ω load in shunt with 5 pF, the total harmonic distortion for a ±1 V sinusoidal output at 10 MHz is typically −60 dBc. The peak specified output is ±2.5 V minimum into a 500 Ω load.

The AD603 uses a patented proprietary circuit topology—the X-AMP®. The X-AMP comprises a variable attenuator of 0 dB to −42.14 dB followed by a fixed-gain amplifier. Because of the attenuator, the amplifier never has to cope with large inputs and can use negative feedback to define its (fixed) gain and dynamic performance. The attenuator has an input resistance of 100 Ω, laser trimmed to ±3%, and comprises a 7-stage R-2R ladder network, resulting in an attenuation between tap points of 6.021 dB. A proprietary interpolation technique provides a continuous gain control function that is linear in dB.

The AD603 is specified for operation from −40°C to +85°C.

Applications

  • RF/IF AGC amplifiers
  • Video gain controls
  • A/D range extensions
  • Signal measurements

    • Data Sheet, Rev. H, 5/07

    Features

    • Linear-in-dB gain control
    • Pin-programmable gain ranges
      −11 dB to +31 dB with 90 MHz bandwidth
      9 dB to 51 dB with 9 MHz bandwidth
    • Any intermediate range, for example −1 dB to +41 dB with 30 MHz bandwidth
    • Bandwidth independent of variable gain
    • 1.3 nV/√Hz input noise spectral density
    • ±0.5 dB typical gain accuracy

    Diagrams

    AD603 Diagram
    Functional Block Diagram for AD603
    价格、封装以及购买

    Help

    产品型号
    产品型号是指能够购买或者索取样片的某类产品的具体型号。

    产品状态
    产品状态指该产品当前的生存周期。它指下面四个阶段之一：
    • 预发布：该产品型号尚未投入正式生产，但是可以提供样片。
    • 生产：该产品型号目前已在生产，可以购买和索取样片。
    • 停产前限时购买：该型号已经计划停产，但仍然可以在限定的时间内购买。
    • 停产：该型号产品已经停产，不再提供。本表格中列出的其它型号产品仍可以供货（如果这些型号不处于停产状态）。
    封装说明
    这种集成电路（IC）的封装说明，例如：DIP，SOIC和BGA封装。评估板是一块用来演示器件性能的试验板，该器件也包含在该评估板上。

    欲详细了解封装图和化学成份请访问：  封装网页

    引脚数
    引脚数是指该器件的引脚、球状焊点或焊盘的数量。产品技术资料中提供引脚排列图和引脚功能描述。

    温度范围
    这是指该器件允许的工作温度范围。以下为所规定的三种温度范围：
    • 民用温度范围：0 ºC～＋70 ºC
    • 军用温度范围：－55ºC ～＋125ºC
    • 工业用温度范围：不同型号的产品的温度范围可能不同。欲了解更多信息，请查阅产品技术资料。
    • 汽车工作温度范围：-40 ℃～ +125 ℃
    报价
    这里所列出的美国报价单仅供预算参考，指美元报价（规定订量的每片美元，美国离岸价），如有修改不再另行通知。由于地区关税、商业税、汇率及手续费原因，国际报价可能不同。对于特殊批量报价，请与您当地的ADI公司办事处或代理商联络。对于评估板和套件的报价是指一个单位价格。

    Production Availability
    This is the date Analog Devices, Inc. anticipates that the product will ship from the warehouse. Most orders ship within 48 hours of this date.Once an order has been placed, Analog Devices, Inc. will send an Order Acknowledgement email to confirm your delivery date. It is important to note the scheduled dock date on the order entry screen. We do take orders for items that are not in stock, so delivery may be scheduled at a future date. Also, please note the warehouse location for the product ordered. We have warehouses in the United States, Europe and Southeast Asia. Transit times from these sites may vary.
    Sample availability may be better than production availability. Please enter samples into your cart to check sample availability.

    无铅封装产品
    ADI公司由于对应用环境的考虑，提供许多无铅（Pb）封装产品。欲获知更多关于无铅封装产品的信息，请访问我们的 Pb 无铅（Pb）封装产品网页。

    *这里所列出的美国报价单仅供预算参考，指美元报价（规定订量的每片美元，美国离岸价），如有修改不再另行通知。由于地区关税、商业税、汇率及手续费原因，国际报价可能不同。对于特殊批量报价，请与您当地的ADI公司办事处或代理商联络。对于评估板和套件的报价是指一个单位价格。
    **Sample availability may be better than production availability. Please enter samples into your cart to check sample availability.

    浏览代理商名单